17
akytec GmbH - Vahrenwalder Str. 269 A - 30179 Hannover - Germany Tel.: +49 (0) 511 16 59 672–0 - www.akytec.de
4.6 Settings
The tab
Settings
contains all settings for data logging. The tab consists of 5 panes:
–
RS2 settings (Devices)
– parameters of connection with other devices over RS2 interface
);
–
Digital signature
– log file integrity control (
);
–
Common settings
common logging parameters (
);
–
Date and time settings
– device date/time settings (
–
Scheduled logging
– logging timetable (
Fig. 4.8 “Settings” tab
The buttons
Read
,
Apply
and
Default
in the lower part of the window are applicable for all
parameter groups except
Scheduled logging
, which has separate control buttons.
4.6.1 RS2 settings
The pane contains parameters of connection with other devices over RS2 interface.
Table 4.5 “RS2 settings” pane
Parameter
Description
Baud rate
Data exchange rate (9600…15200 bit/s)
Stop bits
Number of stop bits (1, 2)
Parity
(none, even, odd)
Device address
Device network address as Slave (1…247)
Response delay
Response delay (0…50 ms)
Mode
Network mode:
– Master (
Modbus RTU / ASCII, AKYTEC
)
– Slave (
Modbus RTU only
)
– Slave Ext (
Modbus RTU only
)
– Spy (
AKYTEC only
)
