11
akytec GmbH - Vahrenwalder Str. 269 A - 30179 Hannover - Germany Tel.: +49 (0) 511 16 59 672–0 - www.akytec.de
Table 4.2 Background color
Background color
Meaning
white
The parameter in the program and in the device are
synchronized
pink
The parameter has been changed but is not yet synchronized
with the parameter in the device
grey
The parameter is unavailable and cannot be changed
4.2 MSD200-PC connection
To establish connection between MSD200 and PC:
1. Start
MSD200 Configurator
on the PC.
2. In the pane
RS1 (PC) settings
), select
COM port
. Appropriate port number can be
found in
Device Manager
under a topic
Connections (COM and LPT)
. If the device driver is
successfully installed, a virtual COM port will appear in the list.
3. Select the connection type:
–
RS-232
– for connection over USB or over RS1 with RS485-RS232 adapter (for further steps
see
–
Modem
– for connection over modem (for further steps see
Fig. 4.1
4. Connect MSD200 to PC over USB or connect RS1 interface to serial port of the PC using
RS485-RS232 adapter.
NOTE
When the device is connected over USB, the RS1 interface is temporarily disabled. The RS1
interface is available again when the USB interface is disconnected.