background image

14

Translation of original user instructions

Signs and Symbols

Caution!

Strict following of these warning alerts can prevent injury 

to persons and/or materials.

Special guidelines for improved comprehensibility 

and handling.

Intended use

This equipment is intended for trimming and mowing a lawn 
in a private facility.

A different, and thereby departing, use is understood as 
unintended.

Caution!

The equipment may not be employed in a commercial 

operation.

Meaning of the symbols on the device

Caution!

Read the operating instructions

Wear protective glasses, safety helmet 
and hearing protection

Wear gloves

Wear safety boots

Keep body and clothing away from the 

cutting works

Danger from propelled objects

15m(50ft)

The distance between the equipment 
and a third-party must be at least 15 m

Introduction

Read this documentation before placing into operation. 

 

„

This is the prerequisite for safe working and trouble-free 

handling.
Observe the safety and warning alerts in this 

 

„

documentation and on the device.
This documentation is a permanent component of the 

 

„

described product, and should be handed over for the 

disposal of the buyer.

Safety Guidelines

Only use the device when it is in a technically problem-

 

„

free state
Do not disable safety and protective devices

 

„

Device must not be operated with other cutting tools or 

 

„

ancillary equipment  
Wear suitable working clothing:

 

„

long pants, secure footgear, gloves

 

„

hard hats, protective glasses, hearing protection

 

„

While working, observe a secure foothold

 

„

Do not operate the device under the infl uence of alcohol, 

 

„

drugs or medication
Always operate the device with both hands

 

„

Keep grip dry and clean

 

„

Keep body and clothing away from the cutting works

 

„

Keep third-parties away from dangerous areas

 

„

Keep foreign objects away from the working area

 

„

Always keep protective guard, line head and motor 

 

„

clear of mowed debris
When leaving the device: 

 

„

Turn off motor

 

„

Wait until the cutting works come to a stop

 

„

Do not allow the device to be unattended

 

„

Never allow children, or other persons who do not 

 

„

understand the operating instructions, to use the 

machine. Local rulings can determine the minimum age 

for operating persons.

Summary of Contents for BC 410






















Reviews: