GB
Translation of original user instructions
10
AL-KO Lifting Support
Installation
Installation dimensions -
A
A
B
C
D
E
F
F
B
G
H
I
M
min. max. min. max.
1239300/301 1239362 310
424
281
445
140
364
302
40
41.5
45
200
1239339/340 1239363 320
440
297
464
142
382
320
40
41.5
45
200
1239346/347 1239364 420
624
397
654
150
481
419
40
41.5
45
200
1239351/352 1239365 460
710
446
744
155
531
469
40
41.5
45
200
*
all dimensions in mm
A Order number for lifting support
F Dimensions of support
B Order number for lifting support installation kit
G Installation dimensions
C Required frame height
H Installation dimensions
D Height of support
I Installation dimensions
E Dimensions of support
M Drive shaft length
Installation variants
The lifting supports are screwed onto the frame in the specified positions (
A). Tightening torque: 45 - 50 Nm.
There are 2 different installation variants:
Installation variant A with collar knockouts
in the frame
Series installation ( 2 -a)
2 Designation
Quantity / side
1 Lifting support
1
2 Frame
1
Installation variant B without collar knock-
outs and holes in the frame
Retrofit (
2 -b)
3 M10 hexagon nut (DIN 985-10)
2
4 Plate (604147)
1
5 Installation plate (1239370)
1
Operation
Before use
Lowering the support
Apply the hand brake
On soft ground, use an appropriate base
On uneven ground, use chocks or levelling blocks
Avoid one-sided loading when lowering supports
Push on crank handle and turn in the direction indi-
cated by the arrow labelled “PARK”.
Retracting the support
Push on crank handle and turn in the direction indi-
cated by the arrow labelled “DRIVE”.