AL-KO CS 4030 Instructions For Use Manual Download

Page: 28 / 232

CS 4030

About these operating instructions

20 Technical data ......................................... 44

21 After-Sales / Service ................................ 45

22 Guarantee ................................................ 46

ABOUT THESE OPERATING
INSTRUCTIONS

■

The German version is the original operating
instructions. All additional language versions
are translations of the original operating in-
structions.

■

It is essential to read through these operating
instructions carefully before start-up. This is
essential for safe working and trouble-free
handling.

■

Always safeguard these operating instruc-
tions so that they can be consulted if you
need any information about the appliance.

■

Only pass on the appliance to other persons
together with these operating instructions.

■

Comply with the safety and warning informa-
tion in these operating instructions.

1.1

Legends and signal words

DANGER!

Denotes an imminently danger-

ous situation which will result in fatal or serious
injury if not avoided.

WARNING!

Denotes a potentially danger-

ous situation which can result in fatal or serious
injury if not avoided.

CAUTION!

Denotes a potentially dangerous

situation which can result in minor or moderate
injury if not avoided.

IMPORTANT!

Denotes a situation which can

result in material damage if not avoided.

NOTE

Special instructions for ease of un-

derstanding and handling.

PRODUCT DESCRIPTION

These operating instructions describe a hand-op-
erated electric chain saw that is operated with a
rechargeable battery.

2.1

Designated use

The chain saw is exclusively designed for domes-
tic, DIY and gardening applications. In this sector,

the chain saw can be used for light wood sawing
work, e.g. for:

■

Cutting up timber

■

Pruning hedgerows

■

Sawing firewood

Because of the electrical drive, the rechargeable
battery-chain saw can be used not only on open
ground but also in closed rooms for sawing wood.
Any application not in accordance with the appli-
cation described here shall be regarded as mis-
use.

The chain saw must not be used in the commer-
cial sector.

CAUTION! Danger of injury due to non-

designated use!

If wood or other substances

embedded with foreign bodies are sawn with the
chain saw, injury can result.

■

Only use the chain saw for light wood sawing
work.

■

Before sawing wood, check for foreign bod-
ies, e.g. nails, screws, fittings.

2.2

Residual risks

Even when using the appliance as intended,
there is always a certain residual risk that cannot
be excluded. The following hazards cannot be
ruled out due to the nature and design of the ap-
pliance.

■

Contact with the exposed teeth of the chain
(risk of cutting)

■

Access to the moving chain (risk of cutting)

■

Sudden and unexpected movement of the
bar (risk of cutting)

■

Detachment of parts of the chain (risk of cut-
ting/injury)

■

Detachment of parts of the wood being
worked on

■

Impairment of hearing during work if ear de-
fenders are not used