Translation of original operating instructions
8
AL-KO EASYAIR
®
flat
2
Safety instructions
2.1
Intended use
The range of application of these units is exclusively ventilation and extraction in rooms and buildings, maintenance of
the required indoor climate and reduction of the content of dust and other contaminants in the air. It may only be op-
erated in the temperature range from -20 °C to +40 °C. In addition, the EASYAIR
®
flat units are designed exclusively for
horizontal ceiling mounting. Deviating ranges of application must be agreed with the manufacturer.
The risk is borne solely by the user. For the intended use, the unit must be professionally installed and operated as
intended. To do this, observe the relevant chapters (see chapter
). Furthermore, the intended use also means compliance with the operating and maintenance
conditions listed in these operating and assembly instructions (see sections
Servicing and maintenance” on page 51
).
The unit is intended for transporting breathable air.
Only operate the EASYAIR
®
flat unit fully assembled.
Protect the unit from moisture.
Only use original spare parts from AL-KO THERM.
Children and people who are not familiar with the unit may not use it.
Observe the accident prevention regulations and fire protection regulations.
2.2
Foreseeable misuse
The AL- KO THERM EASYAIR
®
flat unit may only be operated within the scope of the technical data specified by AL-KO
THERM. Any use other or more extensive than that described in
is regarded as not in
accordance with the intended use. The manufacturer cannot be held liable for damage resulting from this.
Possible misuse includes:
Conveying media with non-permissibly high or low temperatures.
Conveying explosive media.
Conveying aggressive media or heavily dust-containing media.
Use in an explosive atmosphere.
2.3
General safety instructions
WARNING
Risk of serious injury or death if working without
personal protective equipment.
Working on the EASYAIR®flat unit without PPE can result in serious injury or death.
Observe the safety instructions in this operating and assembly instructions.
Use the personal protective equipment when working on the installation.
Use other protective equipment according to the work carried out.
