LED displays
467 774_c
17
LED DISPLAYS
START
STOP
Normal operating mode
Switching condition
LED display
Function description
Push the START /STOP button. Pump
switches on and starts to draw water.
PUMP ON LED
display lights up.
FLOW CONTROL
LED display flas-
hes.
Initial commissioning:
Suction and
pressure side connected, pump filled
with water, water present on suction
side. Pump connected to the mains.
Pump running.
PUMP ON LED
display lights up.
Pump feeds water. Water is removed
on the pressure side.
Pushing the START/STOP button - the
pump switches off.
LED displays off.
Pump off
Special mode
In order to use a Hydrocontrol or a remote control switch, the pump must start automatically, the special
mode must be actuated for this.
Switching condition
LED display
Function description
Activating the special mode:
Keep
the START/STOP button depressed
for 10 seconds when inserting the
mains plug.
All LED displays
flash.
Pump now starts immediately. Mode
is retained, even when removing the
mains voltage. Special mode active
when LED display PUMP ON flashes
in operation.
Activating the special mode:
Keep
the START/STOP button depressed
for 10 seconds when inserting the
mains plug.
All LED displays
flash.
Pump switches off immediately. Start
again by pressing the START/STOP
button
