GB
Translation of original user instructions
30
Petrol lawnmower
Faults and remedies
Caution!
The motor shaft and mower blade should not be aligned.
Fault
Solution
The motor does not start
▪Add petrol
▪Set throttle lever to "Start"
▪Switch on the choke
▪Press the motor switch at the handlebar
▪Check the spark plugs and replace if necessary.
▪Clean the air filter.
▪Spin the mower blade
▪Recharge the starter battery
▪Start on a surface already mowed
Motor power reduced
▪Adjust the cutting height
▪Resharpen / replace the mower blade
▪Clean the outlet shaft/housing
▪Clean the air filter.
▪Reduce the working speed
Lawnmower cuts unevenly
▪Resharpen/replace the mower blade
▪Adjust the cutting height
Grass catcher does not fill
sufficiently
▪Adjust the cutting height
▪Allow the lawn to dry
▪Resharpen/replace the mower blade
▪Clear the grille on the grass catcher
▪Clean the outlet shaft/housing
Wheel drive does not work
▪Adjust the Bowden cable
▪V-belt faulty
▪Contact the service-workshop
▪Clean any dirt away from the wheel drive, toothed belt and gearing
▪Lubricate the freewheels (drive pinion on drive shaft) with spray oil
Wheels do not turn when the
transmission is switched on
▪Retighten the wheel bolts
▪Wheel hub faulty
▪V-belt faulty
▪Contact the service-workshop
Unusually strong vibrations in
the lawnmower
▪Check the mower blade
For faults not listed in this table, or which you cannot resolve by yourself, please contact our customer service.
