Address:800 S Wineville Avenue, Ontario, CA 91761,USA
Website:www.aladdin-e.com
Email: tech@aladdin-e.com
4
2.Operation
B1924-05
the fine-focus-knob to get the clear image.
When using the oil objective 100XR, a little of immersion oil must be put
between the objective and the cover glass. In addition, only when the Abbe
condenser is on the arm, the 100XR objective could be used.
2-4 Adjust condenser
For the microscope with Abbe condenser, turn the Abbe condenser to or down
to get the image brightness suitable for observacation.
2-5 Adjust diaphragm
For the microscope with disc diaphragm, turn the diaphragm to select a aperture
to get the background brightness suitable.
For the microscope with iris diaphragm, adjust the aperture of the iris diaphragm
to get the background brightness suitable.
2-6 Output digital image
Insert one end of the USB into the back port of digital observe tube, and insert
another end to PC. Then observing and processing the digital image by using
Microsee.
Run AutoRun.exe in disc to install the software and the driver, then do the steps
following with the suggestions on the interface.
