background image

8/00                                                                         23                                                                     33072C

i30SE Direct Vent Gas-Fired Fireplace Insert (Firebox Only)

A Division of Hearth Technologies Inc.

LIFETIME WARRANTY

LIFETIME WARRANTY

The Aladdin Hearth Products limited Lifetime Warranty guarantees that the following components will work as designed for the 

lifetime of the stove or Aladdin Hearth Products will repair or replace them.  These items include but are not limited to steel 

and cast iron components, flame plate, firebox reflector, combustion chambers, heat exchanger systems, stainless steel firebox 

components, burners, gas logs, gold plating, doors, glass damaged by thermal breakage, steel baffles and manifold tubes.

ONE YEAR WARRANTY

All electrical components such as but not limited to blowers, wiring vacuum switches, speed controls, control boxes, thermodisc 

switches, pilot assembly, ignitors and gas valves are covered under Aladdin’s one-year warranty program.  Carburetors are 

covered under Aladdin’s one-year warranty.  Labor to repair or replace these parts is covered for one year, reimbursed per 

our warranty service fee schedule.

CONDITIONS

This warranty is non-transferable and is made to the original retail price purchaser only, provided that the purchase was made 

through an authorized dealer of Aladdin Hearth Products.  This Aladdin product must be installed by a competent, authorized 

service contractor.  It must be installed and operated at all times in accordance with the Installation and Operating Instructions 

furnished with this product, as well as any applicable local and national codes.  Any alteration, willful abuse, accident, or misuse 

of the product shall nullify this warranty.

Labor to repair or replace items covered under the limited Lifetime Warranty will be covered for the first five years per our 

warranty service fee reimbursement schedule.  Parts covered under the limited Lifetime Warranty will be covered for the 

lifetime of the appliance up to a maximum of five years after Aladdin Hearth Products discontinues the model.  Adjustments, 

regular maintenance and cleaning, and temporary repairs do not qualify for a service call fee and will not be covered.  The 

replacement of consumer replaceable items and installation of upgraded component parts do not qualify for a service call 

fee, and will not be covered.

This limited Lifetime Warranty does not extend to or include surface finish of the stove, door gasketing, glass gasketing, 

thermocouple covers, firebrick, kaol wool or other ceramic insulating materials.  It does not cover installation or operational-

related such as overfiring, use of corrosive driftwood, downdrafts or spillage caused by environmental conditions, nearby 

trees, building, hilltops, mountains, inadequate venting or ventilation, excessive offsets, or negative air pressures caused by 

mechanical systems such as furnaces, fans, clothes dryers, etc.

Any installation, construction, transportation or other related costs or expenses arising from defective part(s), repair, replace-

ment, etc., will not be covered by this warranty, nor will Aladdin Hearth Products assume responsibility for them.  Further, 

Aladdin Hearth Products will not be responsible for any incidental, indirect, or consequential damages, except as provided by 

law.  Aladdin Hearth Products will not be responsible for any alteration to the unit which causes sooting that results in damage 

to the interior or exterior of the building in which this appliance is installed.  This limited Lifetime Warranty does not apply 

to venting components, hearth components or other accessories used in conjunction with the installation of this product not 

manufactured by Aladdin Hearth Products.

This warranty is void if the stove has been operated in atmospheres contaminated by chlorine, fluorine, or there is any damage 

to the stove or other components due to water or weather damage which is the result of, but not limited to, improper chimney or 

venting installation.  Aladdin Hearth Products may, at its discretion, fully discharge all obligations with respect to this warranty by 

either repairing or replacing the unit, or refunding the wholesale price of the defective part(s).

This limited Lifetime Warranty is effective on all Dovre stoves sold at point of purchase after July1, 1998, and all Quadra-Fire 

stoves sold after September 1, 1996, and supercedes any and all warranties currently in existence.

f i r e - p a r t s . c o m

Summary of Contents for i30SE


























Reviews: