Section 4 - Service
revised 04/19
SCHWARZE SUPER UPDRAFT
63
11.1 Checking Head Flaps for Wear
The pick-up head flaps are in need of adjustment
when there is a 1/4” gap between the pavement and
the bottom of the flaps. Your Schwarze SuperVac
Updraft is designed to make flap height adjustment
quick and easy. As the flaps wear and a gap
appears between the ground and flaps, simply
remove one of the skid spacers from each side of
the head to allow the flaps to come in contact with
the ground.
To adjust the angle of the skid, loosen the three
Nylock nuts that hold the skid plate to the head,
place the skid at the desired angle and re-torque.
11.2 Flap Replacement
When a 1/4” gap appears between the rubber flaps and the pavement and there are no more spacers to
remove, it is time to change the flaps. In order to change the flaps, the pick-up head must be removed from
under the truck.
1.
Remove the chains from the cylinders, the bolts that connect the drag bars to the head, the head springs,
and the 10” hoses.
2.
Slide the head our from under the truck on the driver’s side and turn the head upside down.
Checking Head Flaps for Wear
Flap Replacement
Summary of Contents for Schwarze SUPERVA C SUPER UPDRAFT
