Alaris Passport Flatbed Accessory, User Manual

6

A-61882  December 2018

Using the Alaris Passport Flatbed Accessory

Flatbed scanning 
(E1000 Series) 

Passports

Use the flatbed to scan passport documents that cannot be fed through 
the scanner. You can scan passports in two ways; by scanning just one 
page at a time, or by scanning two pages at the same time. Either way, 
to scan a passport:

1. On the TWAIN driver profile settings screen, set 

Paper source

 to 

Automatic

. If there is no paper in the scanner input tray, the 

application will expect to scan at the flatbed.

For an ISIS application: review the ISIS help file for system 
configuration.

2. Choose the scanning profile or task to use in your application. 

3. Remove all pages from the input tray of the scanner. 

4. Place the passport 

face down

 on the glass platen. You can scan 

two pages or one. The left illustration shows scanning two pages; 
the right shows scanning one page. For either case, the passport 
should touch both the far edge and the right edge of the platen. 
Keep your hand on the passport for best results. 

5. Select the Play/Scan/Start icon in your scanning application.

Smaller documents

Use the flatbed to scan other types of small documents that cannot be 
fed through the scanner.

1. On the TWAIN driver settings screen, set 

Paper source

 to 

Automatic

. If there is no paper in the scanner input tray, the 

application will expect to scan at the flatbed. 

For an ISIS application: review the ISIS help file for system 
configuration.

2. Choose the scanning profile or task to use in your application.

3. Remove pages from the scanner input tray. 

4. Place the small document on the flatbed platen. 

5. Select the Play/Scan/Start icon in your scanning application.