Alaris Passport Flatbed Accessory, User Manual

A-61882  December 2018

7

Using the Alaris Passport Flatbed Accessory

Combining a scan from 
the flatbed with scans 
from the input tray

A document scanned from the flatbed can be combined with one or 
more documents scanned from the scanner input tray into a single file. 

1. On the TWAIN driver profile settings screen, set 

Paper source

 to 

Automatic

.

2. Choose the scanning profile or task to use in your application.

3. Place documents to be scanned into the scanner input tray and start 

the scan.

4. After the scan has started, place the passport (or other small 

document) on the flatbed and slide it to the far edge of the platen. 
The flatbed switch must be actuated for the flatbed to scan (see 
below). The flatbed is shown without the cover so the flatbed switch 
is visible. 

After the documents in the scanner input tray are scanned and the 
transport times out (this may take several seconds), the passport (or 
other small document) will be scanned. The images scanned from the 
scanner input tray and from the flatbed will be included in the same file.