Alaris Passport Flatbed Accessory, User Manual

A-61882  December 2018

9

Using the Alaris Passport Flatbed Accessory

5. To scan more passports, insert them one at a time on the flatbed, as 

above. Each time a passport touches the flatbed switch, scanning 
will begin. 

6. To scan other pages (e.g. forms) into the same document, put paper 

into the scanner input tray. Scanning will begin. 

7. Choose 

Stop

 in your application to stop scanning into that 

document.

Smaller documents - 
profile settings

To scan pages that are too small to reach the flatbed switch (see, 
“Passports - profile settings” on page 8), modify the TWAIN driver 
profile setting as follows: 

1. Set 

Paper source

 to 

Automatic

. If there is no paper in the scanner 

input tray, the application will expect to scan at the flatbed. 

2. If you will sometimes scan multiple items into the same file, set 

Action when timeout occurs

 to 

Pause Scanning - wait for paper

. 

3.

Check

Automatically start scanning

. 

For an ISIS application: review the ISIS help file for system 
configuration.

Smaller documents -
initiate scanning

1. Remove pages from the scanner input tray. 

2. Put the page to scan on the flatbed platen. 

3. Choose the scanning profile or task to use in your application. 

Scanning will begin. 

NOTE: You may need to press a Scan/Start button. 

4. To continue scanning into the same document: 

- Place another page on the platen and choose the Play/Scan/Start 

icon in your scanning application, to start scanning, or

- Put paper into the scanner input tray, to start scanning. 

5. Choose 

Stop

 in your application to stop scanning into that 

document.