4
A-61882 December 2018
Using the Alaris Passport Flatbed Accessory
Connecting the
flatbed to an S2000
Series Scanner
The Installation Guide in the box with your flatbed shows how to
connect the flatbed to the scanner and your PC.
1. Power down the scanner. Unplug the scanner power cord from the
wall and from the scanner.
2. Place the flatbed on a table or desk. Place the scanner on the
flatbed as shown below.
3. Take the short power cord that comes out of the flatbed, and
connect it from the flatbed to the scanner, as shown below.
4. Remove the short USB cable from the flatbed box. Use it to connect
from the flatbed to the scanner, as shown below. Use the USB 2.0
port for this connection,
not
the USB SuperSpeed port.
Summary of Contents for Passport Flatbed Accessory
Page 1: ...Passport Flatbed Accessory A 61882 User s Guide...
Page 2: ......
Page 16: ...12 A 61882 December 2018 Using the Alaris Passport Flatbed Accessory...
Page 17: ......
