A-61882 December 2018
5
Using the Alaris Passport Flatbed Accessory
NOTES on the above illustration:
- Your scanner may also have a USB cable from the other USB
port to your PC.
- Your scanner may also have an Ethernet cable from the scanner
to the wall.
5. Take the power cord that you removed from the scanner. Connect it
to the flatbed, then plug it into the wall outlet.
6. Turn on the scanner. Turning on the scanner will also power up the
flatbed.
NOTE: The flatbed will automatically calibrate when it powers up.
During calibration, the flatbed motor will run and the lamps/
LEDs will be illuminated. You can also request a calibration
from the menu on the scanner screen.
7. The flatbed power indicator light will blink when the flatbed is being
powered up. The light will become steady when the flatbed is ready
to be used.
NOTE: If you need to disconnect the power cable from the scanner or
flatbed, turn off the scanner first, then disconnect the cable.
Summary of Contents for Passport Flatbed Accessory
Page 1: ...Passport Flatbed Accessory A 61882 User s Guide...
Page 2: ......
Page 16: ...12 A 61882 December 2018 Using the Alaris Passport Flatbed Accessory...
Page 17: ......
