A-61870 July 2017
9
2 Installation
The
Installation Guide
that came with your scanner shows how to install
its components, drivers, and scanning software. Installation follows the
steps below, for your scanner model.
Install the S2050 or S2070
1. Open box.
2. Pull out
Installation Guide
.
3. Attach input tray as shown on the
Installation Guide
.
4. Connect the scanner power cord. Turn scanner on.
Do
not
attach the USB cable yet.
5. Get the driver software:
- If your PC has access to the internet, go to
www.kodakalaris.com/go/installS2000
and download the latest
firmware and driver software.
- If your PC does not have internet access, put the CD from the
scanner box into the CD drive of your PC.
6. Follow steps of the “Alaris S2000 Scanners” driver installation. The
installer will tell you when to connect the USB cable.
7. Download other included software from the scanner support page
for your model, for example
www.kodakalaris.com/go/S2070support
.
8. (Optional) Install Info Input Express Limited Edition (LE) by following
installer prompts.
Install the S2060w or S2080w
Get started
1. Open box.
2. Pull out
Installation Guide
.
3. Attach input tray as shown on the
Installation Guide
.
4. Connect the scanner power cord. Turn scanner on.
5. Follow instructions on scanner screen.
Summary of Contents for S2050
