A-61870 July 2017
23
3 Scanning
Scanner settings
When you are not scanning you can reach the Settings
menu with the
button. Settings offers these options:
•
Information
gives you a few key facts about your
scanner, such as firmware version.
•
Calibrations
lets you calibrate the multifeed detection
system.
NOTE: Multifeed calibration is needed rarely and should be done
only if an Alaris Technical Support person instructs you to
calibrate, or if the scanner has been moved to a location at a
high elevation.
•
Maintenance
gives you the ability to record performance of important
scanner maintenance, such as scanner cleaning.
Scanner display and buttons:
S2060w/S2080w scanners
Conventions in the S2000w display screens
The Status bar
on the display
screen shows connections for the scanner: USB, wired network,
wireless network, or wireless directly.
The Back
button goes back once.
The Next
button advances to the next screen.
The menu
icon leads to network and power Settings.
This icon
beside a menu option means you have a choice of “on”
or “off” for the option:
The colored icon means “on” and the gray icon means “off.”
Summary of Contents for S2050
