30
A-61870 July 2017
3 Scanning
Enhanced stacking, to maintain order in output stack
Using the tilt stand may be especially helpful with enhanced stacking.
To set up enhanced stacking, in the TWAIN setup for your job:
• Settings
• Device
•
Transport
tab: set
Handling
to
Improved Stacking
for most mixed
batches of paper or
Best Stacking
if the batch contains pages that
have greatly varying sizes.
Lightweight paper
Straighten the stack of input paper, then fan pages, before placing them
in the feeder.
Do not push lightweight paper too far into the input tray. The scanner
needs to detect the pages, but pushing too far may crumple delicate
paper.
For pages less than 7 lb/27 gm
2
weight, set
Active Feed
to
None
(go to
the TWAIN
Settings
>
Device
-
Transport
tab).
NCR paper
“No carbon required” (NCR) paper is coated with chemicals that affect
the scanner rollers and can degrade scanner feeding performance.
After scanning NCR paper you should clean the scanner. See
“Cleaning procedures” on page 38.
Scanning small items
If you are scanning small items such as a driver’s license or credit card
— especially hard cards that are relatively thick — they should be
scanned with the embossed side up and ideally one at a time. You may
need to assist them by hand.
One card may be scanned first in a batch with larger pages.
Feed hard cards in landscape orientation.
Summary of Contents for S2050
