A-61870 July 2017
43
4 Maintenance
7. Look at the cavity in which the feed rollers are housed. If it seems to
contain excessive dust, wipe out the dust with a folded roller
cleaning pad. You may also use a vacuum to clean this area.
8. Reinstall the feed roller cover by positioning it around the paper
present sensor (step 1), aligning the bottom edge of the cover with
the scanner (step 2), and pushing it back into position until it snaps
into place (step 3).
Cleaning the transport rollers
Use a roller cleaning pad to clean the transport rollers. Six are
accessible from inside the scanner (shown below). Two are more easily
reached from the underside. See “Underside view” on page 7.
Step 2
Step 3
Step 1
Summary of Contents for S2050
