Alaris S2050, User Manual

64

A-61870  July 2017

Appendix B Warranty — US and Canada only

How to obtain Limited Warranty service

Alaris

Scanners are supplied with information on unpacking, setup, installation and operation. Careful reading of the User’s 

Guide will answer most of the technical questions the end user might have regarding proper installation, operation and 
maintenance of the product. However, should additional technical support be required, you may visit our website at: 

www.kodakalaris.com/go/imsupport

or contact: Kodak Alaris’ Response Center: 

(800) 822-1414

The Response Center is available Monday – Friday (excluding Kodak Alaris holidays) 8 a.m. to 5 p.m. EST.
Before placing the call, the eligible purchaser should have the Alaris

Scanner model number, part number, serial number and 

proof of purchase available. The eligible purchaser should also be prepared to provide a description of the problem.
Response Center personnel will assist the end user in resolving the problem over the phone. The end user may be asked to run 
some simple, self-diagnostic tests and report the resulting status and error code messages. This will assist the Response 
Center in determining if the problem is the Alaris

Scanner or another component and if the problem can be resolved over the 

phone. If the Response Center determines a hardware problem exists that is covered either under the Limited Warranty or a 
purchased Maintenance Agreement, a Return Material Authorization Number (RMA) will be assigned as needed, a service 
request will be initiated and repair or replacement procedures will follow.

Packaging and shipping guidelines

Purchaser must ship all warranty returns in a method that guarantees full protection of the product from shipping damage. 
Failure to do so will void the Alaris

Scanner warranty. Kodak Alaris advises the purchaser to keep the original box and packing 

materials for storing or shipping. Kodak Alaris is not responsible for issues related to shipping damage. The purchaser must 
return only the Alaris

Scanner. Prior to shipment, purchaser must remove and retain all “add-on” items, (i.e. adapters, cables, 

software, manuals, etc.). Kodak Alaris accepts no responsibility for these items and they will not be returned with the repaired or 
replacement Alaris

Scanner. All products should be returned to Kodak Alaris in the original shipping container, or an authorized 

packaging box for the units being returned. Purchaser must install the shipping restraint before the Alaris

Scanner is shipped. 

When the original packaging is not available, contact Kodak Alaris’ Response Center at (800) 822-1414 for part numbers and 
replacement packaging ordering information.

Return procedure

Eligible purchasers seeking services for Alaris

Scanners covered under this Limited Warranty must obtain a Return Material 

Authorization Number (“RMA”) by calling (800) 822-1414 and within ten (10) business days from the date of issuance of the 
RMA must return the Alaris

Scanner to the address designated in the RMA at the end user’s own expense and risk, in 

compliance with Kodak Alaris’ current Packaging and Shipping Guidelines.
Any defective products or parts replaced by Kodak Alaris become the property of Kodak Alaris.

Customer responsibility

BY REQUESTING SERVICE, THE ELIGIBLE PURCHASER ACKNOWLEDGES THE TERMS OF THE LIMITED WARRANTY, 
INCLUDING THE DISCLAIMER AND LIMITATION OF LIABILITY PROVISIONS. PRIOR TO SEEKING SERVICE, THE END 
USER MUST BACK-UP ANY DATA OR FILES THAT MAY BECOME DAMAGED OR LOST. KODAK ALARIS IS, WITHOUT 
LIMITATION, NOT RESPONSIBLE FOR LOST OR DAMAGED DATA OR FILES.

Warranty Service descriptions

Kodak Alaris offers a range of service programs to support its Limited Warranty and to assist with the use and care of the Alaris

Scanner (“Service Methods”). An Alaris Scanner represents an important investment. Alaris

Scanners provide the productivity 

needed to stay competitive. The sudden loss of this productivity, even temporarily, could seriously affect the ability to meet 
commitments. Downtime can be very expensive, not just in the cost of the repair but also in time lost. To help alleviate these 
problems, Kodak Alaris may use one of the service methods listed below, depending upon product type, in providing service 
under its Limited Warranty.
Included with selected Alaris

Scanners is a Limited Warranty Registration card and a Limited Warranty Summary card. The 

Limited Warranty Summary card is specific by model. The Limited Warranty Summary card contains important warranty 
information, including the model number and the Limited Warranty. Refer to the Limited Warranty Summary card to determine 
the available Service Methods applicable to the particular Alaris

Scanner.

If the Limited Warranty Registration card or Limited Warranty Summary card cannot be located, additional information may be 
obtained about the product, including updated warranty and service program information and restrictions, online at 

www.kodakalaris.com/go/imsupport

.

To avoid service delays, Kodak Alaris urges end users to complete and return the enclosed Limited Warranty Registration Card 
at the first opportunity. If you cannot locate the Limited Warranty Registration card, you may register online at 

www.kodakalaris.com/go/imsupport

.

Kodak Alaris also provides a variety of service programs that may be purchased to assist with the use and care of the Alaris

Scanner. 
Kodak Alaris is committed to providing its customers with quality, performance, reliability and service under the Limited 
Warranty.