Alarm Lock Trilogy DL2800, Programming Instructions Manual

15 

USERS (Continued)

8. Change User Programming Level Ability 

;

8

;

[ _ _ _ ]

;

[ _ _ _ _ ]

:

(User Number)               (Programming Levels) 

Service Code is a "One-Time-Only" code.  Once it is used, it is disabled until enabled again.

; 9 :

9. Enable User 300

(Service Code) 

User Number must be between 2 and 200.  The ability to program one or more 

Programming 

Levels 

may be selected. 

Example 1

: Allow "Basic" User 67 to program levels 1, 2 and 4.  Enter: 

;

8

;

6

7

;

1

2

4

:

NOTE:

  User 67 does not have access to Programming Functions with a Program Level 

Ability of 3. 

E

xample 2:

 Prevent User 67 from programming any programming levels.  Enter: 

;

8

;

6

7

:

NOTE: 

  Having a Program Level Ability of 4 does not allow access to functions requiring 

a Program Level Ability of 3, 2 or 1.   If multiple levels are required, program for each 
level that is required.   

3

2

2

11. Reserved

Programming Functions (cont'd) 

5. User Enable with Timeout  

(Enter Timeout, XXX Hours) 

(This Function enabled through keypad only) 

;

5

;

[ _ _ _ _ ]

;

[ _ _ _ _ ] 

:

(User Number)                         (XXX Hours) 

•

With Function 5, User Numbers must be between 2-200, 299 or 300.  Hours must be between 1-999.   

•

Function 5 can 

temporarily 

override a disabled User (disabled using Function 3 above). 

•

Since this is a temporary feature, Function 5 can 

only 

be enabled using the keypad. 

•

Example:  

Brian, User Number 157, rarely works at the office, but when he does, enable him for his 8 hour work day 

("008") by entering Program Mode and pressing:  

;

5

;

157

;

008

:

. 

•

NOTE:  

Up to 4 Timeout Functions may be pending at any one time.  An error beep will sound when attempting to 

program more than 4 Timeout Functions.   

2

; 6 :

6. Enable Total User Lockout Mode 

(This Function enabled through keypad only)

7. Disable Total User Lockout Mode 

(This Function enabled through keypad only)

; 7 :

User Lockout Mode  

Prevents all User Codes (Except User 1 Master Code) from operating the lock.  

Note: 

Other program-

ming functions or schedules will NOT re-enable Users.  Users must be re-enabled with Function 7.  

Note:  

Does not change the User enable/disable status.  

Note:  

If the lock is currently in Passage Mode 

("door unlocked") and Function 6 is programmed, the lock will remain in Passage Mode. 

M

;

1

0

;

0

0

0

:

10. Erase All Users Except the Master Code

(User 1)  

(This Function enabled through keypad only)

Erases all User Codes except the Master Code (User 1). 

M