15
1. New Master Code
(User Number 1)
2. Add/Delete/Change User Codes 2-300
; 1 ;
[ _ _ _ _ _ _ ]
;
[ _ _ _ _ _ _ ]
:
(New Master Code) (Confirm New Master Code)
; 2 ;
[ _ _ _ _ ]
*
;
[ _ _ _ _ _ _ ]
:
(User Number) (User Code)
User Number must be between 2 and 300.
To delete a code, leave the User Code blank and wait for the rapid beeping to stop.
User Code must be 3-6 digits.
Each User Code can be thought of as a person. As long as each person possesses their own
unique User Code, you can control access to the lock by adding or deleting User Codes. See
"Terminology Used in this Manual" on page 6 for more information.
Master Code must be 6 digits-only.
Master Code is Keypad Code Access only.
Factory Default =
123456
See "Lock Design Overview" on page 5 for more information about Master Codes.
3
M
USERS
Lock Defaults for
DL3500 & DL3500EX
See page 8. Users added
will default to a Group Association and a Program Level Ability as follows:
USER TYPE
USER NUMBER
GROUP DEFAULT
MINIMUM PROGRAM
Master
1
-
M
(All Programming Abilities)
Installers
2 & 3
none
4
(Also 3, 2, 1)
Managers
4 - 6
none
3
(Also 2, 1)
Supervisors
7 - 9
none
2
(Also 1)
Print Only Users
10 - 11
none
1
Basic Users
12 - 50
none
none
Basic Users in Group 1
51 - 100
1
none
Basic Users in Group 2
101 - 150
2
none
Basic Users in Group 3
151 - 200
3
none
Basic Users in Group 4
201 - 250
4
none
Basic Users
251 - 296
none
none
Quick Enable User 300
297
none
none
Quick PC Access
298
none
none
AL-DTM Code*
299
none
none
Service User
300
none
none
Programming Functions
* User 299 is a Non-Pass Code. This is the only code that will initiate data transfer with the AL-DTM.
