26
ACCESS
= Entry into a restricted area.
AUDIT TRAIL
= A date/time stamped log of previous lock events.
BURGLARY CONTROL PANEL
= Provides local alarm and remote
communication to request security for burglary/break-in.
CLOCK
•
REAL TIME
CLOCK
= An accurate built-in clock that allows
date/time stamping of events. The clock can be slowed or
speeded up to fine tune long term accuracy to within three
minutes per year. Programmed only through DL-Windows.
•
CLOCK SETTINGS
= Printout includes date, time, weekday,
and clock speed.
COM PORT
= A computer serial
communications port
used to com-
municate with the Lock and/or Data Transfer Module.
DATA TRANSFER MODULE
= A device that permits transfer of
program/data between a computer and the lock. AL-DTM
Transfer Module.
DATE
= Month, Day and Year entered as MMDDYY. Programmed
only through DL-Windows.
DAY OF WEEK
= Sunday through Saturday (where 1 = Sunday and
7 = Saturday). Programmed only through DL-Windows.
DEFAULT
= Default settings are the original settings that were set
at the factory; in other words, it is the lock's original factory con-
dition when the lock was first taken out of its box. The default
settings are permanently encoded within the lock's fixed mem-
ory, and when the lock is first started, or when power is removed
and re-applied (see Wiring and Power-Up, page 11), the original
factory default settings are re-loaded and take effect.
DISABLE
= Turn off.
DOOR NUMBER
= Identification of each door with a specific num-
ber (1-96). (Used with AL-DTM Transfer Module)
DOWNLOAD
= Send data to lock or AL-DTM.
ENABLE
= Turn on.
EVENTS
= Recorded lock activity.
GROUP
•
USER GROUP
= Defining a User to specific Groups, allows
User entry when the Group is allowed entry. Programmed
only through DL-Windows.
•
GROUP 1 DISARMS BURGLAR CONTROL
= A Group 1
USER CARD entry can disarm an alarm panel during a prede-
fined schedule. Should the Group 1 enter the lock outside of
the scheduled time, the alarm will not disarm. The alarm panel
must be armed through other means. The Burglary Alarm
Panel must be programmed to disarm from an Armed State
Only and the zone input must be programmed for input dis-
arming. Programmed only through DL-Windows.
•
GROUP 1 ENABLES GROUP 4 USERS
= A Group 1 USER
CARD entry during a predefined schedule will allow access to
Group 4 Users. Programmed only through DL-Windows.
•
GROUP 1 PUTS UNIT IN PASSAGE
= A Group 1 USER
CARD entry during a pre-defined schedule will unlock unit.
Programmed only through DL-Windows.
•
ONE TIME ONLY FOR GROUP 3 USERS
= If selected in DL-
Windows, allows Group 3 Users to unlock the door one time
only, then their proximity card becomes disabled. See OI237.
LOG
= See... AUDIT TRAIL.
PASSAGE
= Allow anyone to pass through the door without USER
CARDS ("door unlocked").
PRINTER
= A printout device such as an infrared printer or com-
puter printer.
PROGRAMMABLE RELAY FUNCTIONS
= The relay can be pro-
grammed (via DL-Windows only) for one or more functions. See
page 27 for more information.
RELAY
= Switched output allowing remote control of other devices.
REMOTE INPUT
= Entry into a restricted area, by pressing a button
connected to the REMOTE INPUT WIRES (white and white) by
someone on the other side of the door.
SCHEDULE
= A programmed operation (enable/disable, lock/
unlock, etc.) on a specific day (Sunday through Saturday) and
time. Programmed only through DL-Windows.
SCHEDULES, QUICK
= Any one of four most common types of
schedules can be programmed. Programmed only through DL-
Windows.
TIME
= Hours and Minutes in the HHMM format. Programmed only
through DL-Windows.
TIME/DATE STAMP
= A recorded date and time that an event oc-
curred.
TIMEOUT
= Immediate operation for a specified number of hours.
UPLOAD
= Receive data from the lock or AL-DTM.
USER
= A person who has been provided with a USER CARD for
access through the door.
USER LOCKOUT, TOTAL
= All Users to be locked out (denied ac-
cess). User Cards will not unlock the device.
Glossary
