19
Lock Defaults for the PDL6200 and PDL8200
Users added
will default to a Group Association and a Programming Level ability as follows:
USER TYPE
USER NUMBER
GROUP DEFAULT
ASSOCIATION
MINIMUM PROGRAM
LEVEL (See page 6)
Master Code
1
-
M
Installer Codes
2 & 3
none
4
Manager Codes
4 - 6
none
3
Supervisor Codes
7 - 9
none
2
(Reserved)
10 - 11
none
--
Basic User Codes
12 - 50
none
none
Basic User Codes Group 1
51 - 100
1
none
Basic User Codes Group 2
101 - 150
2
none
Basic User Codes Group 3
151 - 200
3
none
Basic User Codes Group 4
201 - 250
4
none
Basic User Codes
251 - 296
none
none
Quick Enable User 300 Code
297
none
none
(Reserved--see page 7)
298
none
none
Guard Tour Code*
299
none
none
Service Code
300
none
none
Basic User Codes
301-5000
none
none
*This code is a
Non-Pass
code and therefore does not allow passage through the door.
1. New Master Code
(User Number 1)
; 1 ;
[ _ _ _ _ _ _ ]
;
[ _ _ _ _ _ _ ]
:
(New Master Code) (Confirm New Master Code)
2. Adding and Deleting User Codes and/or Proximity
Cards (for User Numbers 2-5000)
; 2 ;
[ _ _ _ _ ]
;
[ _ _ _ _ _ _ ]
:
(User Number) (User Code)
Master Code must be 6 digits-only.
Master Code is Keypad Code Access only.
Factory Default =
123456
See "Lock Design Overview" on page 6 for more information about Master Codes.
M
USERS
Programming Functions
User Number must be between 2 and 5000.
User Code must be 3-6 digits.
Each User Code can be thought of as a person. As long as each person possesses their own
unique User Code, you can control access to the lock by adding or deleting User Codes. See
"Terminology Used in this Manual" on page 7 for more information.
3
(Deleting Entire User)
; 2 ;
[ _ _ _ _ ]
:
[
Beep Beep Beep
]
(Wait 10 seconds for
beeping to end)
(User Number)
(Entering a Proximity Card)
; 2 ;
[ _ _ _ _ ]
:
[
Beep Beep Beep
]
(Present card to reader
within 10 seconds)
(User Number)
(Entering a "User Code" / "PIN No. Code" into the lock programming)
