automatically.
To cancel the real tracking mode: Send SMS
“CANCELTRACKING*123456” to tracker, “CANCELTRACKING” is a command,
“123456” is password, the tracker will send back the information “TRACK CANCEL”or “TRACK NOT SET” to indicate that the
operation is successful or not.
Note: If you set the over area report and over speed report and tracking mode at the same time, then the information SMS will only
be sent to the last preset phone.
Cancel all alert settings
Send SMS “CANCEALARM*123456” to tracker, “CANCELALARM” is a command, “123456” is password, the tracker will send back
information “All Alarm Cancel”, and cancel all the alarm setting in the tracker, including shock alarm, over area alarm, over speed
alarm, real tracking mode etc. If the command or password is incorrect,
the tracker will send back information “Bad Command” or
“Wrong Password”.
Low battery alert
When the tracker battery voltage is low, the GREEN LED on tracker will flash 3 or 4 times, and the tracker will then automatically
send low battery information to the first preset phone number.
To monitor & listen to sound around tracker
Send SMS
“MONITOR*123456” to tracker, “MONITOR” is a command, “123456” is password, the tracker will call the user who sent
this SMS, after which the phone is then connected and the user can listen to the sound around the tracker within a radius of about
3-10 meters.
Talking to preset phone
Press button
“
B
”
or
“
C
”
on the tracker, the tracker will call the preset phone number B or C that you have set, after which the
phone is connected so that you can talk to the preset phone. Note the tracker speaker should be closer to your ear so that you can
hear clearly.
Set power saving mode (sets GPS on/off interval)
Send SMS “SETPOWER*123456*10” to the tracker, “SETPOWER” is a command; “123456” is password; “10” is the interval time.
This means that every 10 minutes the GPS will turn on and receive the location. The interval digit must be a two digit number, from
00 to 99, where the unit is a minute. If the time is longer, then the power saving is greater, 00 = GPS always ON, and 99 = GPS
always OFF, (the factory default is 99, which means GPS is always OFF, except when a call or text automatically turns GPS on. If
