36
8-5 Press
ENT
key to set the settings.
(The screen is changed to the setting screen of alarm temperature for upper and lower limit.)
Log mode
Tag mode
Each one of alarm temperature for upper and lower limit can be set for each channel. The alarm is
given if the recorded data becomes higher than the alarm temperature for upper limit (H alarm) or
lower than the alarm temperature for lower limit (L alarm). The alarm sound can also be given during
recording data.
Move the cursor to a channel and the upper / lower limit by the [
] or [
] key. Then, set an alarm
temperature by the [<] or [>] key, or the ten-key pad.
The settable temperature may vary depending on the input type.
Input type
Alarm setting range
K
−
200.0 to 1370.0
°
C
T
−
200.0 to 400.0
°
C
E
−
200.0 to 700.0
°
C
J
−
200.0 to 700.0
°
C
⇒
Press [CANCEL] key to return to the previous screen.
CAUTION
•
The setting is not available if the input signal type is “V”. The setting is not available for a
channel, which has not been selected.
ログ 番号
各チ ャン ネル の下限 警報 温度
上限 警報 温度
Log No.
Alarm temperature for lower limit of each channel
Alarm temperature for upper limit of each channel