background image

Data Logger Manual

Page 13

5.5.iii.b  Device Range (Maximum)

 

The Maximum Device Range screen can be accessed by pressing the F2 key while viewing the Minimum Device Range 

 

screen.  This display indicates the maximum values which the OM-CP-PR2000 is capable of detecting and logging.  

 

Values on this screen cannot be modifi ed.

5.5.iii.c  Calibration Parameters

 

Pressing F3 while in the Maximum or Minimum Device Range screens will display the device calibration 

 

parameters. This screen displays information indicating the most recent calibration date as well as the date the 

 

next calibration will be due. 

It is important to keep your device properly calibrated to ensure accurate readings.

 

5.5.iii.d  Device Version

 

Pressing the F4 key while viewing the Maximum or Minimum Device Range screens will display the Device Version  

 screen, 

containing 

information such as fi rmware revision number and communications baud rate.  Values on this 

 

screen cannot be modifi ed.

 

5.5.iii.e  Firmware Version

 

Firmware details can be viewed by pressing the F2 key while viewing the Device Version screens. These details include 

 the 

fi rmware version number, date and time of fi rmware creation, and checksum.

Summary of Contents for OM-CP-PR2000


























Reviews: