Alaxala AX6300S series Software Manual Download

Page: 463 / 522

16. SNMP

447

Impact on communication

None

Response messages

Table 16-13:

List of response messages for the snmp getif command

Notes

For five minutes immediately after the power is turned on or the

copy

command is used to

copy the backup configuration file to the startup configuration file, the

response

message

appears because the SNMP agent is being initialized.

If the

snmp-server

community

configuration command is not set, the

response

message

appears and the MIB cannot be acquired.

InPkts

Indicates the number of packets received on an

interface (ifInUcifInNUcastPkts).

OutPkts

Indicates the number of packets sent from an interface
(ifOutUcifOutNUcastPkts).

Message

Description

<SNMP agent IP address>

: host unknown.

An invalid SNMP agent address was specified.

Error code set in packet - General error:

<Number>

A response from the applicable SNMP agent indicating that the

specified object ID is being managed but the MIB value could
not be acquired correctly was received. The object ID specified

at the following position could not be acquired:

<Number>

Error code set in packet - No such variable name. Index:

<Number>

A response from the applicable SNMP agent indicating that the
specified object ID is not managed was returned. The object ID

specified at the following position is not managed:

<Number>

The object ID specified at the following position is not
managed:

<Number>

Error code set in packet - Return packet too big.

The response indicating that an attempt to return a MIB value

exceeding the allowable size was made in the applicable
SNMP agent was returned.

Error code set in packet - Unknown status code:

<Code>

An SNMP frame containing response status code

<Code>

which is undefined (non-standard), was received.

error parsing packet.

An SNMP frame in an invalid format was received.

error parsing pdu packet.

A frame that contains an SNMP PDU frame format error was

received.

No response - retrying

The command is being retried because there were no responses

from the applicable SNMP agent.

No response - try again.

There were no responses from the applicable SNMP agent.

receive error.

A receive error occurred.

request ID mismatch. Got:

<ID1>

, expected:

<ID2>

A frame whose request ID number of the SNMP frame is

<ID2>

was expected, but an SNMP frame whose request ID

number is

<ID1>

was received.

unable to connect to socket.

An attempt to send an SNMP frame was made, but failed.

Item

Meaning

Displayed information

Summary of Contents for AX6300S series











































































































































































































































































































































































































































































































































Search results

Summary of Contents for AX6300S series

Reviews:

Related manuals for AX6300S series

Brands by name

Popular brands

Alaxala AX6300S series, Software Manual

Search results

Summary of Contents for AX6300S series

Reviews:

Related manuals for AX6300S series

Brands by name

Popular brands