19. OADP
497
clear oadp
Clears OADP neighboring device information.
Syntax
clear oadp [port
<port list>
] [channel-group-number
<channel group list>
]
Input mode
User mode and administrator mode
Parameters
port
<port list>
Clears neighboring device information of the specified port.
For details about how to specify
<port list>
and the specifiable range of values, see
Specifiable values for parameters
.
Operation when this parameter is omitted:
Clears neighboring device information for all ports.
channel-group-number
<channel group list>
Clears neighboring device information for the specified channel group number in list format.
For details about how to specify
<channel group list>
, see
Specifiable values for parameters
.
Operation when this parameter is omitted:
The neighboring device information for all channel group numbers is cleared.
Operation when all parameters are omitted:
Information about all neighboring devices retained on the Switch is cleared.
Example
Figure 19-4:
Example of executing the clear oadp command
> clear oadp
>
Display items
None
Impact on communication
None
Response messages
Table 19-6:
List of response messages for the clear oadp command
Message
Description
Can't execute this command in standby system.
This command cannot be executed on a standby system.
Can't execute.
The command could not be executed. Re-execute the
command.
Connection failed to OADP.
Communication with the OADP program failed.
Re-execute the command. If the failure occurs frequently,
use the
restart
oadp
command to restart the OADP
program.
Summary of Contents for AX6300S series
