ATS9360 User Manual
49
Bandwidth 250
MHz
Trigger Delay
Software selectable from 0 to 9,999,999
sampling clock cycles
Trigger Timeout
Software selectable with a 10 us resolution.
Maximum settable value is 3,600 seconds.
Can also be disabled to wait indefinitely for a
trigger event
TRIG IN (External Trigger) Input
Input impedance
50
for ±2.5 V range
2
K
for TTL input
Bandwidth (-3dB)
DC - 250 MHz
Input range
±2.5 V or TTL Input, software selectable
DC accuracy
±10% of full-scale input
Input protection
±8V (DC + peak AC without external
attenuation)
Coupling DC
only
TRIG OUT Output
Connector Used
AUX I/O
Output Signal
5 Volt TTL
Synchronization: Synchronized
to a clock derived from the ADC
sampling clock. Divide-by-4 clock (dual chan-
nel mode) or divide-by-8 clock (single channel
mode)
Certification and Compliances
CE Mark Compliance
Materials Supplied
One ATS9360 PCI Express Card
One ATS9360 Install Disk on USB flash drive
One ATS9360 User Manual
All specifications are subject to change without notice