30
ATS9462 User Manual
Signal Connections
You can use CH A and CH B to digitize data as well as to
trigger an acquisition.
Use the EXT input for an external analog trigger only; data on
the TRIG channel cannot be digitized.
If External Clock Upgrade is installed on your ATS9462, use
the ECLK input for clocking the ATS9462 in applications that
require an external clock. Consult the chapter Optional
External Clock for details on various types of clocking
schemes available.
AUX I/O connector can be used for outputting TRIG OUT
signal, a 5 V TTL signal synchronous with the on-board
trigger signal and the sampling clock.
•
Note that the Trigger Output connector can also be
configured as a Trigger Enable Input through a
software command. Contact factory for details.
