How do I connect the set-top box to my TV set?
16
How do I connect the set-top box to my
TV set?
1
Put your set-top box on a firm, level surface with at
least a 10 centimetre gap around all the sides and
close to the TV you are going to connect it to.
2
Turn off the mains socket your TV is plugged into or
pull the plug out of the socket.
3
Take the aerial lead out of the TV and connect it to
the RF IN connector on the back panel of the set-top
box.
4
Connect the RF cable (we have provided) between
the RF OUT socket on the set-top box and the aerial
socket on the TV. This cable will allow you to watch
TV programmes as you did before but with the set top
box connected.
5
Connect a cable terminated with a scart connector at
each end (we have not provided this) between the
‘SCART OUT’ socket on the back panel of the set-top
box and the ‘Scart’ socket on your TV. If there is more
than one ‘Scart’ connector on the TV, look in your TV
instruction manual to check which one you should
use.
RF IN
R F OUT
SCART OUT
RS-232C
RESET
AC IN
100-240V
50/60Hz
TO AERIAL INPUT
SOCKET ON TV SET
TO SCART INPUT
CONNECTOR ON TV SET
EXTERNAL AERIAL
SET TOP BOX
RF CABLE
SUPPLIED
SCART-SCART LEAD
NOT SUPPLIED
Summary of Contents for Quick 2 View STB8
Page 1: ......
Page 74: ...180907...