18
DISC BRAKE MAINTENANCE
If you feel the brake is tight when you are riding, you can adjust the disc brake
by loosening the screw on the Rotary Knob with a M5 hex wrench (As shown
in the below pictures), turn the Rotary knob slightly towards the right and tight-
en the screw again with a M5 hex wrench. Conversely, if you feel the brake
is loose, you can turn the Rotary knob slightly towards the left after loosen-
ing the screw on the Rotary Knob with M5 hex wrench, and then tighten the
screw.
WARNING
It is forbidden to remove the battery pack by persons who are not ex-
pert professionals. Failure to do so may result in serious safety risks,
electrical faults and short-circuits, and cause your warranty to be void.
5- Do not place the battery in an environment with temperatures higher than
50° C or lower than -20° C (for example, do not leave the electric scooter or its
battery pack in the car for a long time in summer), as it may cause a malfunc-
tion or even a fire risk.