6
CONTROL PANEL
CONTROL INSTRUCTIONS
Use the control panel to control the scooter. The specific features are as follows.
1- Long press the power switch to turn on the control panel.
2- Once the scooter is turned on, the default speed gear is “1”. Press “+” to
increase the speed gear and press “-” to decrease it. The highest available
gear is “3”. (The display will change to speed data 3 seconds after adjusting
the speed gear) Different gears are suited for different riding speeds.
3- Press the light switch to turn on the front light and press the light switch
again to turn it off.
4- Press the power button three times to switch between Km/h and mph.
5- When the brakes are applied in an emergency, the brake lights will in-
crease in brightness and start flashing after the brake handles are gripped.
6- Battery power display: four bars are 100%, three bars are 75%, two bars
are 50%, one bar are 25%.
7- Cruise Mode: Press throttle and keep it on the same speed for 8 seconds
to activate cruise mode. (The display screen will flash three times when the
cruise mode is activated)
Power Switch
Light Switch
Speed Gear
Riding Speed
Battery Status
