Albalá Ingenieros AAD3014C01, Manual

Albalá Ingenieros | Manual 

AAD3014C01

The following functions of the AAD3014C01 can be performed remotely:

- Signal level adjustment.

- Configuration of the signal absence and overload detectors.

- Supervision of the status of the error detectors.

4.3.1. Details of the AAD3014C01 registers

The AAD3014C01 module provides control and status registers that can be read and
written by means of specific commands described in the communication control
module user manuals.

The parameter information grouped in the CONTROL or RAM sections is stored in
volatile memory. Any modifications to the parameters will be lost when the module
power supply is disconnected unless the "EEPROM Save" button within the software
has been pressed.

The STATUS section parameters are read-only and cannot be modified.

The parameters that can be controlled and supervised remotely for each version of
the firmware are listed below:

VERSION 2.X

CONTROL

Name

add

ext

msk

snmp trap

Description

MONO

0x00

0x01

Y

N

Allows summing R&L to make a monophonic channel
0=Disabled, 1=Enabled

SILENCE_MASK_R

0x01

0x01

N

N

Allows masking silence fail right channel
0=Disabled, 1=Enabled

OVERLD_MASK_L

0x01

0x02

N

N

Allows masking silence fail left channel
0=Disabled, 1=Enabled

OVERLD_MASK_R

0x01

0x04

N

N

Allows masking overload fail right channel
0=Disabled, 1=Enabled

SILENCE_MASK_L

0x01

0x08

N

N

Allows masking overload fail left channel
0=Disabled, 1=Enabled

GAIN_R

0x02

0xFF

Y

N

Allows adjusting right channel gain
= x/2-96 dB

GAIN_L

0x03

0xFF

Y

N

Allows adjusting left channel gain
= x/2-96 dB

OVL_THR_LEVEL

0x04

0xFF

Y

N

Overload threshold level
= x/2 dBu (-128=<- ? dBu)

SIL_THR_LEVEL

0x05

0xFF

Y

N

Silence threshold level
= x/2 dBu (-128=<- ? dBu)

NO_SIG_TOUT

0x06

0xFF

Y

N

Silence timeout
= x s

STATUS

Name

add

ext

msk

snmp trap

Description

SILENCE_R

0x01

0x01

Y

Y

Silence fail right channel
0=OK,1=Fail

SILENCE_L

0x01

0x02

Y

Y

Silence fail left channel
0=OK,1=Fail

OVERLOAD_R

0x01

0x04

Y

Y

Overload fail right channel
0=OK,1=Fail

OVERLOAD_L

0x01

0x08

Y

Y

Overload fail left channel
0=OK,1=Fail

20