Albalá Ingenieros | Manual
AVD3003C01
3.6. Interconnection
The following figure shows the AVD3003C01 module rear board connector layout.
Rear view of the AVD3003C01
The AVD3003C01 module provides three loop-through inputs (IN-A, LOOP-A, IN-B,
LOOP-B, IN-C, LOOP-C) and two output per section (OUT1-A, OUT2-A, OUT1-B, OUT2-B,
OUT1-C, OUT2-C), all for analog video signals.
The rear interconnection board is not designed to withstand mechanical stress. The
wiring must be fastened properly to the frame where the mounting frame is housed to
prevent the rear board from supporting the weight of the cables.
3.6.1. Analog video connections
The analog video inputs use two BNC connectors configured in loop-through.
The analog video outputs use BNC connectors and have an impedance of 75Ω.
12
Summary of Contents for AVD3003C01
