background image

Albalá Ingenieros | Manual 

AVD3003C01

1. DESCRIPTION

1.1. The AVD3003C01

The AVD3003C01 module is a triple analog video distributor with loop-through inputs
and two outputs per channel.

The AVD3003C01 is a TL3000 terminal line module and can be housed in a three rack
unit (3 RU) UR3000 mounting frame or a 1 RU UR3100 mounting frame.

The AVD3003 family includes a variety of video distributors, with the following
variations:

• AVD3003C01: Triple video distributor with loop-through inputs and two outputs per

channel.

• AVD3003C03:  Triple video distributor with loop-through inputs, two outputs per

channel and single-adjustment equalizers for various cable types.

1.2. Features

• Triple analog video distributor.

• Includes three identical sections.

• Each section provides one loop-through input and two outputs.

• Wide bandwidth.

• One UR3000 mounting frame can house up to 12 AVD3003C01 modules. If power

supply redundancy is required and FA3000 or FA3001 modules are used then only 10
modules can be housed in the mounting frame. If PSU3300 or PSU3301 modules are
used for this purpose then up to 12 modules can be installed.

• One UR3100 mounting frame can house up to three AVD3003C01 modules.

• Low power.

5

Summary of Contents for AVD3003C01























Reviews: