Albalá Ingenieros TTD2000C01, Manual

Albalá Ingenieros | Manual 

TTD2000C01

3. INSTALLATION

THE TTD2000C01 MODULE CONTAINS ELECTRONIC DEVICES SENSITIVE TO
ELECTROSTATIC DISCHARGE. Always use antistatic bags clearly identified
with a high degree of shielding for storage and transportation.

3.1. Initial inspection

Verify that the package has been properly handled during transport. After opening the
packaging, check that the TTD2000C01 module is inside.

You must notify your Albalá Ingenieros distributor or dealer of any damage or defects
observed.

Follow the instructions in this manual to install this module in the mounting frame.

3.2. Safety instructions

• This equipment must be connected to a mains outlet with a protective

earth connection. Never use extension cords that do not have protective
earthing connection. The lack of an effective electrical connection between
the ground pin in the mains input connector of the equipment and the
protective earth of the electrical power distribution can cause serious harm.

• All modules of the Albalá Ingenieros TL2000 terminal line can be 

hot-plugged or unplugged without suffering any damage or affecting the
processes that are currently taking place in other modules in the same
mounting frame.

• The TTD2000C01 module and the mounting frame should always be

installed, maintained, operated and removed by personnel with sufficient
technical qualifications. The equipment should never be placed in damp
areas, near splashing liquid, or in explosive or corrosive atmospheres.
Neither modules nor mounting frames can be used in applications that
could endanger human life.

11