Part # 6410T0008
Rev.F
-10-
Table 1 - Mother Board Terminal Wiring
Terminal
Notice
Description
T3, N, N
NOT USED
Mains output (
NOT USED
)
U,V,W
Motor (Single Speed) (Din rail mounted on Version 2 board)
U2,V2,W2
Motor (Two Speed) (Din rail mounted on Version 2 board)
1 & 2
Stop1 N.C.
1A & 2A
Inertia Brake if applicable
Stop2 N.C.
3 & 4
Open N.O.
3A & 4A
Open N.O.
5 & 6
Close N.O.
5A & 6A
Close N.O.
7 & 8
Electric Edge option
Electric Safety edge, resistor principle, 8,2kOhm
7A & 8A
Pneumatic Edge option
Pneumatic Safety Edge With Seriesed 8.2kOhm resistor
9 & 10
Limit switch “Door opened”
12 & 13
Limit switch “Door closed”
20
See WD503-PC000 for details
Safety photocell 1 – power (DC-)
21
Safety photocell 1 - power (DC+) Switched for self test
22
Safety photocell 1 - power (DC+)
23
Safety photocell 1 - Signal
20A
See WD503-PC000 for details
Safety photocell 2 – power (DC-)
21A
Safety photocell 2 - power (DC+) Switched for self test
22A
Safety photocell 2 - power (DC+)
23A
Safety photocell 2 - Signal
33
Output, 24VDC Negative
33A
34
Output, 24VDC Positive
34A
35 & 36
Motor Thermal switch contact (jumper to 36 if not used)
37 & 38
Hoist or Brake disengagement (jumper to 38 if not used)
45 & 46
Optional
Crash sensor (jumper to 46 if not used)
53 & 54
Reserve, input
55 & 56
Reserve, output
63 & 64
Output, 24V AC
70 & 71
BRAKE 180VDC output (not used on Ovitor motors)
74
Optional
Dry contact contact “Door opened” (Common)
Dry contact contact “Door opened” (N.O.)
Dry contact contact “Door opened” (N.C.)
75
Optional
76
Optional
77
Optional
Dry contact contact “Door closed” (Common)
Dry contact contact “Door closed” (N.O.)
Dry contact contact “Door closed” (N.C.)
78
Optional
79
Optional
80
Optional
Dry contact contact “Warning light”
80A
Optional
81
Optional
Dry contact contact “Warning light”
81A
Optional
82
Optional
Dry contact contact “ Alarm, Door not ready to work” (N.O.)
83
Optional
Dry contact contact “ Alarm, Door not ready to work” (Common)
84
Optional
Dry contact contact “ Alarm, Door not ready to work” (N.C.)
N.O. = Normally Open circuit N.C. = Normally Closed Circuit
Summary of Contents for ACS-50
