Part N
umber
6410T0006
Version 4/23/2010
5
SAFETY PRACTICES
WARNING
THOROUGHLY READ THESE SAFETY PRACTICES PRIOR TO INSTALLING, OPERATING, OR
SERVICING A HIGH-SPEED, RAPID ROLL
®
DOOR. FAILURE TO FOLLOW THESE SAFETY
PRACTICES MAY RESULT IN PROPERTY DAMAGE, PERSONNEL BODILY INJURY, OR
DEATH.
1.
Do not operate a Rapid Roll
®
Door while you are under the influence of drugs or alcohol.
2.
Do not use the door if any parts appear to be broken or damaged.
3.
Stay clear of the door while it is operating.
4.
Keep hands and feet clear of the door at all times.
5.
Do not drive through the door opening unless door is completely open.
6.
Maintain a clear door opening at all times. Keep the door opening free of any obstructions.
7.
Remove power at the fused disconnect during all electrical or mechanical service. OSHA requires a
disconnect to be properly tagged and locked out during all maintenance or service of equipment.
8.
All electrical troubleshooting or service must be performed by a qualified electrician or service person
and must meet all applicable local, state, federal, international, and other governing agency codes.
9.
USE EXTREME CAUTION
when it is necessary to service the control panel while it is energized.
10.
If you have any questions, please contact your local Albany service provider for assistance. Otherwise
contact Albany International at 1-877-925-2468 for information on your local distributor.
All bolts, fasteners, and electrical connections must be checked and
tightened while installing the door.
Summary of Contents for RAPID-ROLL 570
