PX865PE Lite Series
32
Serial ATA Port0/ 1 Mode
This field determines the operating mode of the SATA ports. The options are determined by the
“On-Chip Serial ATA” field.
On-Chip Serial ATA – Combined Mode:
When you set the “On-Chip Serial ATA” to “Combined Mode”, you must select one of the PATA
channels to use with the SATA devices.
Options: Primary Master, Primary Slave, Secondary Master, Secondary Slave
On-Chip Serial ATA – Enhanced Mode:
When you set the “On-Chip Serial ATA” to “Enhanced Mode”, you must determine which of the
SATA devices will be the master SATA device. You configure this with the “Serial ATA Port 0
Mode” field only.
Options: SATA0 master, SATA1 master
Onboard Device
USB Controller
This option should be enabled if your system has a USB port installed on the system board. You will
need to disable this feature if you add a higher performance controller.
Options: Enabled (default)
、
Disabled
USB 2.0 Controller
This option should be enabled if your system has a USB 2.0 device installed on the system board.
You will need to disable this feature if you install a USB 1.1 device.
Options: Enabled (default)
、
Disabled
USB Keyboard Support
Enables support for USB attached keyboards. Options: Disabled (default)
、
Enabled
AC97 Audio
This item allows you to control the onboard AC’97 audio. Options: Auto (default)
、
Disabled
Onboard LAN Control
This item allows you to enable or disable onboard LAN Controller.
Options: Enabled (default)
、
Disabled
Onboard LAN Boot ROM
Decide whether to invoke the boot ROM of the onboard LAN chip. Options: Disabled (default)
、
Enabled
