4
Uso Vasche ACTPFO/ACTPFOD - Code 10004903 - Edition 2 - 09/2007
Hydromassage tubs - instructions for operation
English
9
1
2
fu
lgor 3002
ste
eril 100 td
f
tdf 80
decal
1000 ml
e
td 68
10
Kit di riparazione/manutenzione
vasche in metacrilato
Routine maintenance
In order to maintain perfect ef
fi
ciency, the nozzles
should be dismantled and cleaned at regular
intervals in order to remove any sediment or
scale.
First rotate the external surround on the nozzle
until the slot is in the correct position for insertion
of a screwdriver. Insert the head of the screwdriver
and gently lever off the surround.
Then, use the special wrench to rotate the nozzle
counter-clockwise until the internal ring can be
removed.
Extract the nozzle, dismantle and clean. To
replace the nozzle, perform the same procedure
in reverse.
Cleaning the Ecojet suction nozzle
The suction nozzle features a special internal
device which prevents it from trapping hair and
other residue.
This device should be checked regularly in
order to ensure complete ef
fi
ciency. Using a
cross-head screwdriver, remove the screw and
remove the
fi
lter plate from the nozzle. Remove
any residue by washing the parts with water and
a little bleach. Press the internal plate gently
with a
fi
nger and check that it moves inwards
by about 8 - 9 mm.
Replace the
fi
lter plate and the screw.
Cleaning the Airpool valves
It may happen that the Airpool valves do not inject
air into the water. This may be caused by:
1) Obstruction of the valve by a build-up of
sediment.
2) Jamming of the ball inside the valve.
In either case, this problem is easily solved.
To remove the sediment and therefore restore
the correct movement of the ball inside the valve,
use the special tool supplied with the appliance
to grip the cover and remove the internal body
of the valve.
Wash the valve carefully and check that the
ball moves freely. Apply a layer of soap to the
valve body and replace by pressing gently into
position. Check that the rib is correctly inserted
into the groove.
Note that the valve cover is correctly positioned
when the two tabs beneath the edge are inserted
into their seats.
Cleaning the tub
The tub is built using materials which are easy
to clean and inhibit the build-up of bacteria on
the surface.
It is advisable to clean the tub regularly, preferably
using the speci
fi
c products available from our
authorized dealers and Service Centres.
If you prefer to use other products, the following
recommendations should be followed:
1) Always use a soft cloth; never use abrasive
cleaning products (pads etc.).
2) Never use powder detergents. Always use
good-quality liquid detergents which contain no
alcohol or ammonia.
3) Never use acetone, ammonia or products
containing these substances, as these can
seriously damage the tub. Similarly, never
use products containing formic acid or
formaldehyde.
4) Stubborn stains can be removed using liquid
detergent, silver polish or toothpaste (depending
on the type of stain) and rubbing gently with a
soft cloth.
5) To remove scale stains from the surface, use
lemon juice or vinegar (hot if possible) and rub
gently with a soft cloth.
Special maintenance
Special maintenance
To keep the surface shine even after years of
use, apply a good-quality spray or wax polish
and rub with a soft cloth.
Light surface scratches or cigarette burns can
be removed using the special maintenance kit,
which is available from authorized dealers and
Service Centres.
If the damage to the surface is more serious, or if
damaged components require replacement, it is
necessary to contact a specialized technician.
The manufacturer recommends that users
contact the nearest authorized service centre
for all maintenance operations.
4
3
