8
41
Appendix A - Swivel arm for control unit
To make it easier to approach the table edge, we recommend fitting the optional swivel
arm. This allows the control unit to be swivelled out, away from its original position.
•
Press the cap [71] and swivel the control unit [20] completely to the side.
•
Swivel the control unit [20] to return it to its initial position; the cap [71] lifts up
and automatically locks the swivel mechanism in the process.
•
Turning the clamping wheel [73] clockwise releases the control unit clamp inside the
sliding part [75]. This allows the control unit to be moved slightly in longitudinal dir-
ection within the sliding part [72] if necessary.
•
After you have set the optimum position for you, you need to fix the control unit in
place by turning the clamping wheel [73] anticlockwise in the sliding part [75].
•
If the swivel arm [72] is entirely removed together with the control unit [20], you can
take it out of the holder [74]. However, first remove the plug [30] of the control unit
from the interface (see chapter 5.1).
Removing the control unit from the swivel arm
•
Remove the plug [30] of the control unit from the
interface (see chapter 5.1).
•
Turn the clamping wheel [73] clockwise and slide the control unit [20] out of the slid-
ing part [75].
Attaching the control unit to the swivel arm
•
Slide the control unit [20] into the sliding part [75] and fix it in place by turning the
clamping wheel [73] anticlockwise.
•
Reconnect the plug [30] of the control unit to the interface (see chapter 5.1)
Before inserting the plug [30] into the socket [16] of the interface,
ensure that both parts are clean and there are no metallic particles
on them. If there are any metallic particles, remove these with a
clean, dry cloth.
It is necessary to ensure that the control unit is fixed in place
securely in the sliding part [75] with the clamping wheel [73]. If a
control unit falls to the ground when switched on, this can result in
an unintentional system malfunction and potentially in an accident.
The swivel arm can be fitted to virtually all wheelchair models. Your
specialist dealer can provide more detailed information.
i
Summary of Contents for e-fix eco
Page 1: ...Gebrauchsanweisung e fix eco DE Instructions for Use e fix eco EN...
Page 3: ......
Page 4: ......
Page 52: ...47...
