46
Important operating and safety instructions
Jacking up the wheelchair is not permitted when the wheelchair user
is still seated.
Anti-tippers are not transfer rollers.
Do not move the wheelchair when it is jacked up.
Caution must be exercised when moving or collapsing the anti-tip-
pers, particularly during manual adjustment or activation. As a result
of the high spring force required, there is a risk of crushing between
the holding rod [95] and the clamping piece [94].
Important information
Any changes and assembly work on the anti-tippers, such as adjust-
ing the distance to the ground, may only be carried out by a trained
specialist dealer or by an Alber regional director.
The locking screw for the plug-in part ([96] in the diagram oppos-
ite) must be tightened to 5 Nm. Arrange for your specialist dealer to
carry out this assembly work.
The maximum permissible load for anti-tippers fitted in pairs is 210
kg. The use of only one fitted anti-tipper is not permitted.
Regularly check that the anti-tippers are still seated securely in
the mounting fork [93] of the bracket. Check that the support angle
[97] can still move freely. If screw connections have loosened or
have even come loose or if the support angle is no longer able to
move freely, contact your authorised specialist dealer to rectify
the situation.
93
96
97
Summary of Contents for e-fix eco
Page 1: ...Gebrauchsanweisung e fix eco DE Instructions for Use e fix eco EN...
Page 3: ......
Page 4: ......
Page 52: ...47...
