9
5
Tilt Support
(available as optional accessory)
Before you use the e·motion for the first time,
you should make sure that your wheelchair is
equipped with tilt support!
In the interest of your safety, they should only be removed
to surmount an obstacle such as high curbs and the like. In
such case you need the help of an assisting person.
Since most wheelchairs come with tilt support, the
tilt
support is available only as an optional accessory. It is mounted
at the
plant or done by your authorized local dealer or
distributor, who must observe the included instructions
mounting the tilt support.
The tilt support adjusted to your wheelchair is mounted as
follows:
· First remove the quick pins [b] from the holding device
[d] by pressing your thumb on the center of the pin while
lifting it out with your middle and index finger (see
detail in the drawing)
· Insert the tilt support [c] into the holding device [a].
(The tilt support for the left side is marked with an “L“,
for the right with an “R“.)
a
c
b
b
a
b
a
c
b
