6
3
Wheels
3.1
Holding Device for the Wheels
To mount the e·motion to your wheelchair special holding
devices are necessary, which are mounted by
or any
authorized
dealer. These holding devices generally allow
the employment of the formerly used manual wheelchair wheels
as well as the use of the e·motion powered wheels.
3.2
Delivery of the Wheels and Batteries
Due to safety reasons wheels and batteries are separately
delivered. Thus you can mount the wheel immediately to the
wheelchair as described in the following paragraph.
We placed plastic protection covers (please see chapter 4) on
the batteries’ contact surfaces which you need to remove
according to the instructions delivered with the batteries.
Please keep these in a safe place because they are needed
furthermore for the transportation and storage of the batteries
(please see chapter 10).
1
2
3
4
3.3
Mounting the Wheels
Take any one of the e·motion wheels.
· In case the batteries [2] are
installed in the wheel.
Turn the holding ring [1]
counter clockwise and pull
the entire battery [2] out
of the wheel. Avoid touching
the contact surfaces at the
battery’s back side.
· Take the bow-type handle [4]
situated in the wheel hub [3]
out to 90
°
, which releases
the locking mechanism in
the axletree.
