· Lock the wheel into place by
putting the bow-type handle
[4] back into its original
position.
· Make sure the bow-type
handle [4] is in its original
position and level with the
rest of the surface.
· The wheel sits correctly in its
holding device [5] if it cannot
be removed without pulling out
the bow-type handle [4].
· Mount the second wheel accordingly.
Instructions for removing the wheels from the
wheelchair – see chapter 10
The e·motion wheel is now prepared to mount on the
wheelchair
Attention: never hold, shift or pull the wheel by
the bow-type handle [4] to avoid risk of fracture.
· Remove your wheelchair’s
wheel according to the
respective user’s manual
· Hold the e·motion wheel at
the wheel hub (as shown in
the picture on the right)
and insert it all the way
into the holding device [5]
on the wheelchair.
3
4
5
7
