8
19
4.3.2 Driving screen
In the basic setting, the display on the e-pilot shows the driving screen shown here.
The following indications mean:
[50] = Current time (needs to be pre-set – see chapter 4.3.4).
[51] = Symbol appears if the driving mode TRACTION ASSISTANCE has been activated
(see chapter 4.3.4).
[52] = Bluetooth symbol (lights up blue if there is an active connection)
[53] = Displays the current speed travelled.
[54] = Tour computer.
[55] = Tour computer.
[56] = Graphic display of the battery pack’s residual capacity.
[57] = Indication of the battery pack’s residual capacity in percent.
[58] = Setting and display of the drive speed (see chapter 4.3.3).
Assignment of displays [54] and [55]
The two displays have several functions. You can switch to the next display by pressing
button [31] on button [2].
The following are displayed successively:
[54] = Specifies the tour distance travelled since the last reset.
[55] = Specifies the time taken to travel the distance in [54].
----------------------------------------------------------------------------------------------------
[54] = Average speed of the tour since the last reset
[55] = Specifies the distance travelled since first starting up
-----------------------------------------------------------------------------------------------------
[54] = Distance that can still be travelled on the basis of the residual capacity
of the battery pack. If the residual capacity of the battery pack is less
than 20%, the display shows “---”.
[55] = Preset driving mode (Sport, Tour or Eco).
4.3.3 Setting the drive speeds
The e-pilot is delivered ex works with a maximum speed of 6 km/h, or 10 km/h. By press-
ing button [30] on button [2], you can set the maximum speed of travel as follows:
Bar graph [58]
Maximum speed (value displayed in
green in field [53])
6 km/h version
10 km/h version
1 green bar
3 km/h
4 km/h
2 green bars
4 km/h
6 km/h
3 green bars
5 km/h
8 km/h
4 green bars
6 km/h
10 km/h
If the maximum speed has been set, the display [53] is shown in white.
NEVER use button [32] to change the maximum speed. This button is
used on the driving screen for reversing the e-pilot only!
Make sure to observe the warning about travelling
on slopes on the next page -->
Summary of Contents for e-pilot
Page 3: ......
Page 4: ...Abmessungen Akku Pack ...