background image

 ii 

 

2. SOFTWARE LICENSE AGREEMENT 

 
THIS IS A LEGAL AGREEMENT. PLEASE READ BEFORE INSTALLING 
SOFTWARE. 
 
Any use of this media other than to review this Software License Agreement constitutes 
your acceptance of and agreement with the terms of this Software License Agreement 
with respect to the Albércorp Software. If you do not accept and agree to these terms, you 
must return the full product with proof of purchase to Albércorp within thirty (30) days 
for a full refund. Installation or use of this software product constitutes your acceptance 
of and agreement with the terms of this Software License Agreement.  
 
LICENSORS. All software on this media is licensed to you by Albércorp. 
 
GRANT OF LICENSE. You are granted the right to use the Albércorp Software on a 
single personal computer. You may copy the software to use with this personal computer 
to any one hard disk drive of this personal computer and to the memory of this personal 
computer, provided that you reproduce all copyright and trademark notices, restricted 
rights legends, and other proprietary markings. 
 
RESTRICTIONS. You may not sublicense, rent or lease the Albércorp Software. You 
may not reverse engineer, decompile, disassemble, modify, translate or create derivative 
works of the Software. 
 
LIMITED WARRANTIES AND LIMITATION OF LIABILITY. The limited warranties 
and limitation of liability in Section 1 of this file apply to, are incorporated in, and are 
made a part of this Software License Agreement. 
 
EXPORT LAW ASSURANCES. You acknowledge and agree that the Software is 
subject to restrictions and controls imposed by the United States Export Administration 
Act (the "Act") and the regulations there under. You agree and certify that neither the 
Software nor any direct product thereof is being or will be acquired, shipped, transferred 
or exported, directly or indirectly, into any country, or used for any purpose, except as 
authorized by the Act and the regulations. 
 
GOVERNMENT LICENSEE. If you are acquiring the software on behalf of any unit or 
agency of the United States Government, the provisions of Section 3 apply to, are 
incorporated in, and are made a part of this Software License Agreement. 
 

Summary of Contents for Cellcorder
















































Reviews: